Update: NavTool and Dice Ipod Kit Install





NavTool Plug and Play Harness





NavTool Wire Harness connected to the back of the DVD Navigation


Here are the 2 plugs (3pin/6pin) behind the cd changer.
The 3pin was very hard to remove. I think I cracked it.
Is this replacable? I think its for powering the cd changer.





Is this the phone harness or AMP/DSP harness? The black plug says AMP. But I read that there is a phone harness back here so I connected a t-tap to the purple/white wire (12v switched power) on this harness.



I ran the ground wires and the negative(-) wire to this bolt (I hope this is ground)




Does anyone know what this is (RED text)? I thought it might be the ground harness. There were alot of brown wires connected to it. It's also connected to a bolt. Thats why I connected my ground wires to it (YELLOW text).


NavTool installed. The black/red wires on top is a switch that I will be running to the front of the car in the ashtray. The switch is so that I can activate the videos on the nav screen.


Dice Ipod Cable pulled through the side of the back seat.


More to come.
lc