Quote:
|
Originally Posted by btrvalik
I think you are right on the holes being too close together. And the box may not have enough volume to support them either. If the box is big enough I could always cut/grind away the speaker frame in the overlapping area where the circles meet. Depending on box volume I may just use a single 8".. I think it is big enough for that.. I'll know once I measure it. Do you have a recommendation for a 8" sub? I was thinking of going with JL but perhaps there is a better choice? I live in the Boston Area... custom sub up here was 1600-1800 installed. Seemed rather steep for my needs.
|
Not sure why you do not want to go for a 10" rather than 8" if you have to cut the box anyway
. A 10" fits and renders well as I explained in one of my posts and you will have less openings to close. If you use a 8" not only you will get less bass but you will have a lot more opening to seal
. A 10" almost cover the two 6" holes if you do it right.... but it is your choice and your X5 budy!
...just my 2 cents