Originally Posted by Essam Khafagi

Amp was wired today as per the below pics... You can tap into the OEM amp plug as follows:

Channel 1: Blue with Black stripe (+) twisted with Brown with Orange stripe (-)

Channel 2: Yellow with Black stripe (+) twisted with Brown with Orange stripe (-)

Remote: White single Wire

Power: I used the green box behind the spare tire to the left. I had three empty slots

Ground: There is a ground bolt under the handle you use to pull the spare tire out.

I still did not make the final wiring routes and still did not secure the amp in place below the NAV drive. Tomorrow I will paint the box and install the sub then finalize everything. Box details will be in the next post.

and here are the pics: