|
No, You can not use PA Soft scanner to connect to I-Bus. Use PA only to modify LSZ directly to EEPROM or coding data block 00 to switch off bulb warning for Your lights. You have to know what to change to proceed. I verified some pre-facelift E46 coding data and I will post them to KiwiJochen. NavCoder will know soon how to do it for pre-facelift E46.
Check, if PAscanner contacts with engine (and gearbox if You have automatic) module. If it does and other modules show no communication, You must connect pins 7 and 8 inside OBD2 connector as the chinese replica is connected just to pin 7. I had to do this modd to make my interface working.
__________________
Despite driving Xsīsmaller brother E46/3, still having a lot in common ...
Last edited by KamilFKH; 02-04-2009 at 10:59 AM.
|