Quote:
|
Originally Posted by francoE38
ok I will now how do you connect this to the car? pictures please
|
Mine connects to the CD changer line in the trunk (2001 325i sedan).
I took a standard serial cable, connected it to the back of my laptop, then ran the other end to the adapter I bought linked above. Then I connected the CD changer cable to the adapter. You need to verify the correct pin nout of the CD changer cable.
Quote:
|
Originally Posted by Jaycee
At the rear of your CD player it is the 3-pin connector you need. The red wire is +12v, the brown wire is GND and the white/grey/yellow wire is the i-Bus feed.
Connect to the interface pins as labelled in your picture, the NTSC pin will obviously be unsused.
The following page on Rolf's website explains it further : Interface Installation |
Detail of the connection to CD changer input. Notice which wires line up with the Ibus serial interface:
