It is pretty simple. Get under there with a flashlight and look from the front of the seat to the rear, you will see the clips and how they are attached. Here's a couple of quick pics with my cell phone:

- Remove the screw in the rear of the plastic trim


- Use a flat blade screwdriver or similar to detach the clips. I started by removing the clip on the front first, then worked toward the rear.


- Once it is out, you unplug the harnesses (carefully) and remove the actuator from the plastic trim.







- To reinstall just snap the new actuator back into place, install the harnesses, pop the trim clips back into place and replace the screw in the rear.

Hope that helps.

__________________
Custom X Page | Support Xoutpost!