Quote:
|
Originally Posted by Tom G. and others
[email protected]
I noticed something else with my e38 - when I start the car it flashes "CORE NOT FOUND" very quickly before loading the iPod details.
Khalil
The problem I have is that every few days the DICE/IPOD says DETACHED. Unfortunately I have to go to the trunk and cycle the power on teh IPOD. Sometimes after I cycle the power on the IPOD I get ATTACHED, however, I cannot get the DICE/IPOD to work. Any ideas? X5 3.0 w/nav, no DSP.
NY-4.8IS
Losing text on nav screen and OBC
I have the same dreaded problem here. It was an easy install and Im using a 1st gen NANO with updated software. Even so, When I hit mode to get to the IPOD I have to hit 6 then 2 for playlist. the text rarely is correct.
I did a few times but even when I didnt, and/or I would plug it back in.....the text would vanish or not update as I change songs ....
Tom G.
Sounds like a possible configuration issue. Are all the DIP switches on the module set to the UP UP UP UP positions?
|
'01 740iL
I have all of these problems/symptoms.
I have tried all your suggestions (battery cables, etc.)
I have tried all the display options 6->2/3/5/6/7. None of them works consistently.
The iPod doesn't have to be left overnight. I can't get it to Attach/Start after running into the office for a meeting.
Often the text is stuck at "TR( TR" or something to that effect. The music plays just fine and the track up and down still work. The lockup of text will occur whether the text is displayed on the dash or the Navi display.
Is there a software update on the horizon or is this unit just bad?