|
So out of the list above, I only managed to do the following due to time restrictions, mostly.
New rotors on the front
New pads all around
Brake fluid flush
New microfilter
Crankcase cleaning. Used Seafoam instead of Berrymans.
New oil & filter
Valve cleaning using Lubro Moly Ventil Sauber
Cleaned the ICV, DISA, MAF and Throttle body
New plugs (NGK Iridium IX) - no noticeable difference. BOSCH/BMW plugs were in it before although I was under the impression that BMW used NGK as was the case for my E39.
Boots for the plugs were the wrong ones but after inspection, the existing boots looked pretty good.
Planning to do the VANOS seal replacement and a cooling system flush next weekend. That should be a good 7 hours. With that will come the valve cover replacement.
Replacing the oil separator looks like the job from hell. After pulling out the air intake boots and ICV, I still couldn't see the oil separator clearly enough to actually work on it.
The fuel filter has boggled my mind. It seems as if there is a belly pan underneath the tank but as to how you get it down, I have no clue. There are bolts and screws which are easily removed but on my '06 there are also what looks like pop rivets that I have no clue how to remove.
|