according to TIS:
Front camber = -12' +/- 25'
which translates to -.2 degrees +/- .41 degrees (max of -.61 degrees per side)

Rear camber = -1 degree 50' +/- 20'
which translates to -1.83 degrees +/- .33 degrees (max of -2.163 degrees per side)

I did a quick check with my intercomp gear and got this on the new to me X5:
Front camber = -2 degrees per side
Rear camber = -4 degrees per side
which is way off from what the TIS says.. and i'm sure the CPO process on my X5 should have checked for alignment since Inspection II was performed also....

but there is no way the rears can be at around -2 degrees camber on any X5 leaving the factory (according to TIS)... either that or these 15+ hr work days is making my math conversions really bad????

so, if anyone has alignment sheets they can post, i'd be most appreciative