There is no need to open the plastic housing/loom. The clips on the plugs for the injectors are a bitch to let go... just takes precicion leverage or a long angled pick to pry out the retainer springs on the injector plugs, but those are what's holding it at this point. They don't just fold inwards as they are against the brackets they are bolted to. If you just want to try to push it over just enough for clearance, try removing the 5 10mm bolts that hold the fuel rail down to the manifold. (one front center, 2 on each side where the black brackets that go across bolt down)

__________________
"When you do things right, people won't be sure you've done anything at all" (Bender, futurama)

You make something idiotproof, they'll make a better idiot

You think professional is expensive, just wait until you pay for amateur.

Never let your sense of morals prevent you from doing what is right.

Examine what is said, not who speaks.

X5 pics

RIP 4.6is.....

2003 4.6is