Quote:
Originally Posted by rastaFarai
1. Bluetooth and telephone module (not even an option on nav screen - is this because no DSP? I think i saw DSP before when turning on after upgrading version but i did a few other things after that)
|
Telephone will automatically appear on the nav screen if the teelphone control unit (TCU) in the trunk has power and is talking on the ibus. You don't have to do anything to the nav to make it appear, it just pops up if it is alive.
So check the power, ground and ibus connections on the TCU.
Quote:
Originally Posted by rastaFarai
2. Voice of Navigation
|
Using your wiring diagram, check that the voice cables are correctly hooked up to the VM (if old gen) or to the radio module (if new gen). You can test the voice output by changing the nav volume in settings, you should hear "louder" "quieter" etc
Quote:
Originally Posted by rastaFarai
3. DSP for amp and sub. currently not hooked up. installer said it was missing the parts on my loom.
|
If your loom was a non-DSP loom, then your DSP won't work until you change the loom. DSP is cable differently and has 3 x connectors to the amplifier, non-DSP has 2 x connectors. Again, if DSP exists and is alive and taling, it automatically appears on the nav menu.