Thanks for all your help so far guys. Subwoofer + iBus interface goes in tomorrow.
Mr Canuck(great name),
Quote:
|
The midwoofers in the front/rear doors are a 6 1/2 poly cone model with a 2 ohm impedance
|
That sounds unusual. Did you measure them with an impedance meter, or an ohmmeter? The value read by an ohmmeter will ALWAYS be <= actual impedance. For speakers with a decent voice coil inductance, you can often have an impedance of 8 ohm, but resistance of only 1-2 ohms. This has a bit of an explanation:
Electrical impedance - Wikipedia, the free encyclopedia
Z is the impedance, R is the resistance, X is complex component of the impedance, which is related ito the inductance (and to a lesser degree, the capacitance) of the speaker.
Tweeters frequently read a higher resistance (8 ohms) as they would only have a very small (=low inductance) voice coil, or no voice coil at all (piezo perhaps).
Quote:
|
The front tweeters in the door pillars are 8 ohm 1 1/8 'ish soft dome models
|
I didn't realise you had tweeters. DId you originally think you had a total of 6 speakers as I do? Is your amp in the wheel well? I think I found mine there.
Quote:
....
You can also try this link for wiring diagrams Xoutpost.com
|
Thanks Essam. Sweeeet link. One thing I can't find though, is a parts location diagram. There's a very basic one off the main xoutpost page, but it doesn't show things like the alternate locations of the amp, where my TV box is, etc..
Cheers + thanks again to all...
Scott (One happy skippy
Skippy the Bush Kangaroo - Wikipedia, the free encyclopedia )