|
Hmm. Well, I do recall accessing those links, but I installed my brake controller a couple months ago, let's see if I can help you go for it.
power and ground are fairly obvious. The sending wire is the tricky one, and the blue (as I recall) off the prodigy runs to the rear. There are a couple ways to pick up the brake light signal for the controller, on mine, I tapped into the LCM in the passenger's footwell.
The full write up I have attached in .pdf You'll need to run a fused power wire to the front, I pulled mine off one of the larger power wires in the rear, with a splice. It is fused separately. No problems, and I've got about 2000 miles of towing under the belt since then.
|