Quote:
Originally Posted by mdeep1
Hey guys, I've searched and searched and can't find an answer to this problem. I've seen one other member have the same problem, but nobody ever answered him. Basically, I'm trying to install an aux input by connecting the pins for the adapter into slots 3, 4, and 10. However, there are already pins in slots 3 and 4. I tried removing those two pins and then inserting the wires from the aux input, but the radio wouldn't turn on when I did this. Any ideas? Instead of having just two wires in the black 12-pin harness, I have four. I have no clue what to do.
|
mdeep1, did you end up getting aux input to work? I had the same problem, found the input referred to in this thread, i.e. into business cd. I have installed and put back together. Pressed mode with ipod connected but no AUX mode showing?? (I have business CD, no nav, no DSP - 2004 facelift). Anyone else welcome to help too (please)...
More info: Attached is the BMW instructions that show the positions of the wires in the connector. They refer to a blue/white, a white/brown and a white/yellow from the new aux input. Unfortunately, the aux input has blue/white, brown/white and red/white. I matched the colours, i.e blue/white(actual aux in) to white/blue in diagram, etc and put the red/white onto where the instructions showed yellow/white.