Hi, sorry I don't have an image, the shop just ordered the part and installed it, I never saw it.
Wow, I do know they changed the brake light switch also, which is not an overlay expensive part, and I do not think the brake light switch has anything to do with the wipers, horn, airbag or radio.
When you get the transfailsafe error, from what I was told, you should see a decrease in performance, so watch that, but have you replaced the igniation switch, I am assuming no, but if you do it yourself the voltage should be 12, mine was getting 5, which caused all the problems. The part isself is $80 around here from the stealer, so maybe just have them replace it, whether they want ot or not, and see if it works, but have them check the voltage before you get it swapped.
When the local shop had mine, they ran 12 volts right to the radio and it worked fine, so mine was the ignition switch for sure.
Quote:
Originally Posted by royemaun
Hi RDM3,
Do you have an image of what the ignition switch looked like? I was advised by the stealer to change this thing that holds the windshield wiper switch and turn signal switch underneath the steering wheel, but i bought this part from other vendor as it was not available in stock. I decided to change it myself and was successful to replace this part. But the problem is after few minutes, the issue is there again, no horn, no radio, airbag sign is lit and the seatbelt sign gone, (resetting the battery would solve issue but will only last for few minutes as well or after turning ignition off) plus when i try to open the sun visor which has a small mirror and light above it i've noticed that it causes the "Transfailsafe Prog" message to appear on the cluster, while bulb is not lit which infact it should. I don't want to go to the stealer as i feel that the part which i have replaced is really not the issue. any suggestion?
Thanks,
|