Quote:
Originally Posted by fe342185
Good to ear you got it going. I did mine via a bosch relay since the backup light had static when used as the power for the camera. From what I was told the reverse wire has a pulsed 12V so it can cause a static to the video output.
The relay is switched on by the reverse light and the power is pulled directly from the battery.
I installed the Z110bt and I love it. Works some much better than the OEM.
|
So i wired the back-up camera module positive wire to ACC,and negative i grounded it. The wire i had to connect was a reverse(wire which tells navigation when car goes reverse),so i hatd to connect it to the positive wire of back-up light.