Quote:
Originally Posted by inavver
Warning
That firmware that was from m3cutts that khizman accidentally posted as a glitch !
Lets say you have the speed cameras ON, the language is in English and all is good.
As soon as you turn the cameras off it goes into French ! As soon as you change the language back to Englisht the cameras go back ON.!
Options are - cameras on constantly or cameras off and put up with french lingo.
People who run an E39 will see this annoying due to the OBC and the Traffic programme being all in French 
|
This is not a glitch, and had you bothered to
READ the thread then you would have noted that this is explained in full.
This is one of the reasons that I did not post that link here, it has caveats, you should have read them and understood them before you blindly installed the software.
In summery;
This is the way that it works, the "off" options should only be used as a temporary measure the DEFAULT is "on", because the "off" is a modded version of the FRE language set (Text and Voice), these (for the nav computer) have been converted to English and work perfectly, the "glitch" is that the TV, phone and some other modules these have there own language sets loaded (and these can't be changed).
If you want it to work fully (with all the other stuff in English) then there is a fix, go back and read the thread it has all the info you need to do it, you need navcoder, an i-bus interface and a OEM v32 OS disc.
Quote:
|
This has kinda screwed me over as I'm not sure if there is a fix for this glitch,
|
Yes there is a fix.
Quote:
if there isn't I dunno how to get back to stock V32 either
Any help anyone?
|
Download a normal v32 (from this site) and install it, like Jochen says, dead simple mate, all problems solved.