Quote:
Originally Posted by R.C.
I looked around the forum to find out how to reset the oil lights on an 04 4.8is and i can't find anything. I looked under the hood and couldn't find the plug with the 7 and 19 pins in it. does anyone know how to do this or do I need the reset tool?
thanks R.C.
|
There is nothing under the hood to reset service / maintenance light on 4.8is ( under hood OLD cars lol ), you have to use cluster tabs / pins to reset your light i will try to post link how to.
find it here you go:-
BMW insp. reset
- Iginition OFF (POS 0)
- Press and Hold the trip odometer button while turning key to position 1 (ACCESSORY)
- Keep the button depressed (about 5 secs.) until you see "Oil Service" or "Inspection" with "Reset" or "Re" in the display
- *Note: On vehicles with "High" cluster, you will also see the amount of fuel (in litres) remaining until next service
- Press the button again and hold for approx. 5 secs. until "Reset" or "Re" flashes
- While the display is flashing, briefly press the button again to reset the Service Interval. After the display has shown the new interval you should see "END SIA" for about 2 secs.
Note that if the "Reset" or "Re" does not flash, then you have not met the minimum consumption level and cannot reset.