|
I'm assuming you took off the back of the seat in order to run the wires. In order for the headrest to move up and down you still need to actuate the motor that controlled the stock ones. If the rods are sliding in the same holes as the stock headlights, then they must be touching the actuator. I don't know if the headrest TV kit has the same little ball at the bottom of the rods or not, but if they don't, there must be some way to connect them so they'll slide up and down via that actuator.
__________________
650hp 10 X5///M - Stage 2, Vibrant 1794's , gutted cats, custom intake, AC Forged 22's 325hp 98 BMW 740iL - ///M5 6spd, www.bavengine.com w/ Performance Option, electric fan, CF intake tube w/ heatshield, Mag 14816 w/ notched bumper, Bilstein/H&R Stage II/Powerflex 600+hp 02 Harley F150 - MHP900 Stage 3 engine, KB2.3, 8# lower, 60# inj, Walbro FP's
135hp 01 TL1000R - M4 full exhaust, K&N, Yosh box, -1/+2 gears, 2CT's
|