Placed some coins on top of the cup holder roll up top. When I picked up the coins, missed a penny. Once the cup holder cover was rolled back, the penny was able to slip behind the cup holder and fall underneath (within console).

It redefines irritation to hear that coin roll up to the front when you brake, and roll back when you accelerate. But not so much that I could pay dealership big $$$ to dig coin out.

Had a look on Realoem parts diagrams and went to work trying to remove coin (at this point, assumed it was coin, if not, would have expected loose part).

First task was to gain access to underneath cup holder, apparently, easier said than done, at least, seemed that way at first.

Removed iDrive knob and plastic trim piece around shifter and iDrive controller. Then removed five bolts and removed gear shift assembly.

Photo's show (if I attached them correctly):

1. Removed shifter
2. Coin sitting in slot
3. Photo of borescope screen once I found the coin (note the way the coin was in a track that help it upright and let it roll forward and back)

In the end, recovered the coin and buttoned everything up.

Lesson learned, don't put loose coins on top of cup holder, easy to miss coin in the dark and roll cup holder cover open/down, then you're on a "mouse hunt" (no offense Funf!).

I'll view the this once I post, if I failed to attach pictures correctly, I'll edit and try again.

Attached Images