If I unlock the OBC, there is what seems like an oil temp, but it's either missing the sensor or is an option that needs to be turned on. I just remember seeing one that said "OEL TEMP" but it's noton the list below.

1. Display Car's identification number, HW/SW version, construction date
2. A very beautiful instrument test
3. Current consumption (liters/hour)
4. Average consumption (liters/100 km)
5. Current range
6. I think this is remaining fuel in tank. Three sets of numbers: A/B/C. And I've noticed A+B=C.
7. Engine RPM / Coolant Temp (C)
8. Current Speed (kph)
9. System voltage at Term. "R" (Battery Voltage)
10. Country/Language (US, Spa, Ger, Jap, etc.)
11. Units am/pm
12. Average Speed
13. ETA
14. Date of Software Mask
15. Production Diagnosis
16. ""
17. Display Vehicle Specific Data
18. Alarm Changeover (cont. vs. intermittent OBC chime)
19. Lock/Unlock
20. Correction factor for fuel consumption (nicht ändern!)
21. Reset all defect codes

1. Several numbers and data
2. [Dispay Test]
3. VBR: x,x (liters/hr)
4. RW-VBR: x,x (liters/100 km)
5. RW: x (km)
6. Tliters)
7. TMTL: x,x (liters) / KTMP C
8. V: x (kph)
9. UB: xx,xx (V)
10. LAND: 2=USA, 3=I, 4=E, 5=J, 6=F, 7=CDN, 8=AUS/GOLF, 0=D, 1=GB
11. EINHEIT 1: B3, B4, B5, B6, B7, B8, B9, BA, BB, BC, BD, BE, BF, B0, B1 EINHEIT 2: [similar to above, I didn't want to mess with it]
12. VANK: xx,x (kph)
13. ANKxx
14. ROM:
15. DIAG: 01 01 000 E3
16. PORT: 01 101010000, 02 101010000, 03...etc
17. PROM: 00 12, 01 37, 02 18, 03 E6, 04 02, 05 B3, 06 FF, 07 7E
18. HORN: DTON or [DTON flashing]
19. LOCK: ON
20. KVBR: 1000
21. RESET?

__________________