|
Disclaimer:
Mine was installed on my X5 which wasn't officially support by MDS's Lux H8. The bulb fit in perfectly with X5. But the only problem I fear was that the bulbs has been not tight enough even after it was fully turned.
After some experiment with different o-ring, i found a best fit solution for this.
Its a very tiny o-ring for fixing the faucet. SO tiny that you would not think it will fit or work.
After carefully insert the o-ring using a tiny flat head screw driver to avoid all soldering. Use you hand after it pass the LED and soldering to roll it down the neck of the LUX. Use the Flat head and carefully fit the o-ring over 3 H8 tab.
Insert the Lux H8 back, and you will feel the difference that tiny o-ring brings.
|