Hi Jochen - thanks for taking the time to reply. I've done all the wires i thought i needed, and now it comes up 'Activate Phone' on the nav screen correctly, but i'm unable to get the TCU to go into pairing mode.
Quote:
Originally Posted by KiwiJochen
The circuit diagram shows connector numbers, and also shows the connector pins, wire colour, wire size and wire function.
Just click the connector number for a full table.
|
Not for me it doesn't! When i look at the TCU wiring diagram it doesn't give me wire colours. So i have no idea how to give the TCU the 4 wires from the eject box it needs, when the BIT2 had EIGHT wires.
(see diagrams below)
Quote:
Originally Posted by KiwiJochen
Thats all the info you need.
You see the wiring and signals of the existing BIT2
You see the wiring and signals of the wanted new TCU
Simply transfer the relevant wires from the old to the new
|
Its only simple if you know how to do it.
Quote:
Originally Posted by KiwiJochen
Of course, some will be no longer required, and you may need to reassign some wires running from phone to the eject box.
But it is pretty straight forward.
Work in this order:
Ground
Ibus
Power
Microphone
Audio Out
Eject Box
SOS switch (if fitted)
That's all you need.
|
Ground - done
Ibus - done
Power - done
Microphone - done
Audio Out - done
Eject Box - NOT DONE/CANT DO
Why do i need to connect the eject box anyway? I want to use bluetooth, i have no interest in pluggin in my phone?