Quote:
Originally Posted by neiloakley
Hi Jochen - thanks for taking the time to reply. I've done all the wires i thought i needed, and now it comes up 'Activate Phone' on the nav screen correctly, but i'm unable to get the TCU to go into pairing mode.
Not for me it doesn't! When i look at the TCU wiring diagram it doesn't give me wire colours. So i have no idea how to give the TCU the 4 wires from the eject box it needs, when the BIT2 had EIGHT wires.
Why do i need to connect the eject box anyway? I want to use bluetooth, i have no interest in pluggin in my phone?
|
If you don't want the eject box then don't wire it. Just ignore it.
The only functions the eject box provide are:
1. phone charging
2. passive antenna coupling
3. physical holding of the phone
Pairing mode of the TCU is initiated automatically when you turn the ignition from off to acc/on, but only for first 15s or so
Jochen