See if you can:
- Remove the tangled mess
- Limp to an auto parts store (You can run on the battery, turn the heater all the way hot full blast, and be prepared to use those arm muscles to steer, stereo off, headlights off)
- If the water temp needle moves slightly off center, shut her down and cool off for a bit. Don't want to do this a ton though, it takes a bit of battery current to start the SAV back up.
Ideally, you'll want to locate your closest auto parts store with your phone, and you can make it if it's 10-15 miles away. Highway speeds are best for cooling. (Ask me how I know.)
Dayco
Alt/PS/WP Belt - 5070640
Tensioner Assy - 89349
Idler Pulley for Alt/PS/WP - 89052
Gates
Alt/PS/WP Belt
- K070644
Tensioner Assy - 38218 (Pulleys not included)
Tensioner Pulley for Alt/PS/WP - 38063
NAPA
Alt/PS/WP Belt - 25-070644
Tensioner Assy - 38218 (Pulleys not included)
Tensioner Pulley for Alt/PS/WP - 38063
Did the Alt/PS/WP belt take out the AC belt when it went? You don't have to replace it now... just curious. Good luck! I think a couple $20's slipped to the Auto parts guy could get you back on the road.