View Single Post
  #4  
Old 08-04-2010, 09:43 AM
HPIA4v2 HPIA4v2 is offline
Member
 
Join Date: May 2006
Location: seattle
Posts: 575
HPIA4v2 is on a distinguished road
Quote:
Originally Posted by AUSyTyIN View Post
I'm having an issue with the passenger front window. It occasionally makes a loud popping noise (so loud that it actually scares whoever is sitting in the seat). It is highly annoying, but hasn't actually been a problem until recently.

Twice in the last week it has gone down, and won't go back up. The first time I took the door panel apart, and I was trying to figure out what the problem was when something snapped back into place, and everything seemed like it was normal. I took the plastic pieces off the lift mechanism (the ones that actually go into the window) and they were fine.

I've tried searching around, and I've seen the RX for the window, but I'm not sure that would fix my problem. Thanks for your help.
Did you remove the vapor barrier behind the door panel?
The vapor barrier is the black thin foam material that held by tacky caulk, you need to use xacto knife to cut through the caulk slowly and craefully not to tear the foam then you can see the regulator. I am agreeing with Charlie, most likely it's the steel wire crimp that snaps/broken.
But when mine did, no intermittent symptoms, window stays where it was and I could only hear the motor.
Reply With Quote

Sponsored Links