Quote:
Originally Posted by mojo_dan
I am considering H&R spacers/adapters (unaggressive - probably b/w 10-15mm) so I can mount X6M oem rims on a 2011 X5 that has a slightly different hubcentric bore.
|
The correct workaround in this in this situation would be to have a machine shop open up the hubs on the wheels to the correct 74.1mm diameter to fit the hubs on the rear of your X5. The fronts should already fit, and the offsets should work as well.
Since you will only have to have two of the rims machined, and it should not cost you very much, perhaps on the order of $100. I'm sure that there is a machine shop in CT that could handle the work.