View Single Post
  #2  
Old 10-19-2010, 05:03 PM
JCL's Avatar
JCL JCL is offline
Premier Member
 
Join Date: Mar 2005
Location: Vancouver, Canada
Posts: 11,834
JCL will become famous soon enoughJCL will become famous soon enough
Quote:
Originally Posted by fmk View Post
Said rotors were above min spec. Replaced pads only. Never heard if this. Now I have no way to monitor brake wear under warranty. Rotors will be out of spec before my pad sensor triggers next. Not to mention bedding issues.
If the rotors are above the minimum thickness, and the surface finish is good (that is equally important) they can be reused. I tend not to reuse them when I do brakes myself, since I don't want to have to go back in there chasing any noise issues.

The new pads will take longer to bed and get to full effectiveness due to the variations in the rotor friction surface. Just see how they go for a week or so. You can bed them in yourself with a few hard stops (don't park and apply the brakes right after doing that, drive while they cool down). If you have noise, take it back in.

Rotors won't necessarily be out of spec before the pad sensor triggers again, many posters try and use two sets of pads to each set of rotors. Don't understand your comment on not being able to monitor brake pad wear under warranty.
__________________
2007 X3 3.0si, 6 MT, Premium, White

Retired:
2008 535i, 6 MT, M Sport, Premium, Space Grey
2003 X5 3.0 Steptronic, Premium, Titanium Silver

2002 325xi 5 MT, Steel Grey
2004 Z4 3.0 Premium, Sport, SMG, Maldives Blue
Reply With Quote

Sponsored Links