Quote:
Originally Posted by violafan
ok man, about the upgrades...
if i use these steps, then nothing can be wrong ?! right..
1. Open driver door
2. Start the engine
|
DO NOT START THE ENGINE, turn igntion to stage 1 (radio circuit only).
Quote:
3. Go to Menu - Set - (check Firmware Vers.)
4. Chose the new update CD/DVD vers.
5. Insert in DVD Navi in trunk
6. Follow the indication on screen
7. Eject the CD/DVD
8. Press OK
9. Restart
i mean that i can't damage the Navi Unit if i insert the new CD/DVD upgrades.
- i can damage the Navi only if i stop the engine during upgrade process ?
What NOT to do so u can successfully update your Navi.
thanks
|
As long as the OS have been burned correctly, Then that should be fine, (but that's no guarantee).
Goto the car open the drivers door,
Goto the nav computer and press eject on drive,
Eject the map disc,
Switch ign to pos 1, leave door open.
Insert firmware disc into drive, follow instruction on nav screen.
Wait (approx 6 mins) till sat nav asks to eject cd and reboot.
Eject cd,
Confirm reboot.
That's it.
Do not switch off ignition or close the door when doing the upgrade.