Here are some replacement part numbers if you guys need to refresh some of the s/c kit parts:

V-2 Si-Trim Dinan spec - Vortech P/N: 2E128-270
Pulley - Vortech P/N: 2A036-048
Pulley key, pulley bolt, and retainer washer set - Vortech P/N: 8R101-001
Pulley key only - Vortech P/N: 7U100-070

Note: Use anti-seize on pulley input shaft, pulley key, and inside of pulley.
Note: Use blue loctite on pulley bolt, and torque pulley bolt to 25-30ft-lbs.

S/C Belt - Dinan P/N: D862-6324
Vacuum hose kit w/ 2 check valves - Dinan P/N: D862-6312c
Bypass hose plug - Dinan P/N: D862-06313
PCV valve, couplers, 8 hoses, check valve - Dinan P/N: D862-7128
Oil return hose - Dinan P/N: D393-0358
S/C inlet rubber coupler "heart" - Dinan P/N: D340-0464nln
Intake manifold rubber coupler - Dinan P/N: D340-0628
Upper charge pipe to air bypass valve rubber coupler - Dinan P/N: D340-0104
All other "normal" round rubber couplers for inlet/charge piping - Dinan P/N: D340-0865
Air Filter - Dinan P/N: D401-0430
T9 MAF clamp box pack of 10 different resistors - Dinan P/N: D443-0932 (I have two resistor packs that I'll give to someone for free if they need it!)
MAF - Dinan P/N: D763-1444
Throttle Body - Dinan P/N: D760-3440A

__________________
Previously owned: '03 4.6iS Dinan Supercharged