All,
I updated post #2 in this thread with better pics of the LCM.
Quote:
Originally Posted by tkasser
I'm trying to do this now, but I don't have a white wire with brown stripe. The 4th wire down was green with brown and that didn't work.
Any ideas? 
 |
tkasser, here is my top LCM plug:
1) Please disconnect your tap to the green/brown wire that is in the same physical position as my brown/white wire. (fourth wire down)
2) Your second wire down is brown/white. Please verify with a DMM on that position, +12V with running lights on.
3) If test in step #2 proves good, try taping the relay trigger wire there instead. If test is not good, I am unable to direct you further, as I do not have wiring schematics for the LCM, and do not know if pinout locations have changed between revisions, even though the connector is the same. When I installed my DEPO AE's, I swept the pins with my DMM to find the wire that I am using for my relay trigger tap.