Quote:
Originally Posted by tkasser
Thanks!
I can't tell if the wires are different colors then yours or not. I can't believe that we both have 03 4.6iS's and the wires would be different.
|
If we have exactly the same everything, my only explanation would be that when wiring harnesses are made in the factory, when a spool of wire with one color of jacket runs out on the reel, a different jacket color is used until the reel is replaced by a fresh spool of wire with the original jacket color. This goes for all wiring EXCEPT for ground wires in the harness, which are always brown. The Germans prefer production efficiency I guess.
Crazy huh?
But, if that were the case, you should have had +12VDC with running lights on, on the same pin as me, regardless of wire jacket color. Since you don't, I think that we have an inter-year difference going on with the LCM. Do you have the same exact LCM? I wish I could help further but my limited knowledge ends there. What were the results of the voltage test on the your LCM's pin with the brown/white wire ?
Quote:
Originally Posted by Jordo
Or is this a way to just turn the angel eyes on without any other part of the headlight on? (no low beam, no fog lights, just the halos)
|
Yes, exactly. By using this switch in this position:
Quote:
|
Originally Posted by Jordo
I would like to wire mine up so I have the option to just have the Halo's on and nothing else.... for that slick day time look.
|
Yes, IMHO running just the LED's looks very aggressive on an overcast day and near dawn/dusk.
