Quote:
Originally Posted by vskchoi
hi all
here is the problem, i have replace my rear pads and rotors, and i noticed the pad sensor, that connects to the car is broken...so i bought the socket that connects to the brake sesnor,...but now how do i connect the wires to the exsiting wires hanging out from the car?
there are 2 white wires...and i think couple wires that are from inside the car hanging out..
|
There are two plugs, one on the sensor, and one on the vehicle end. They sit inside a protective box to keep the elements out. It sounds like you need the plug on the vehicle end, as well as a new sensor, if both are damaged.
Read this article, and look specifically at step 14, and the relevant photos in that step.
http://www.xoutpost.com/articles/x5/...e-job-diy.html
__________________
2007 X3 3.0si, 6 MT, Premium, White
Retired:
2008 535i, 6 MT, M Sport, Premium, Space Grey
2003 X5 3.0 Steptronic, Premium, Titanium Silver
2002 325xi 5 MT, Steel Grey
2004 Z4 3.0 Premium, Sport, SMG, Maldives Blue
|