Congrats on the install
Welcome to the select few X3'ers w/ Angel Eyes. I only know of four people (including me and you) that have done it.
Quote:
|
Originally Posted by willrwilli
I did not take my bumper cover off. The headlight will come out but you have to have a perfect angle. It probably would have been faster removing the cover.
|
I did not remove my bumper either. You can remove the four screws on top of the kidney grills to give you more room to angle out the headlights. That is what I did and I had no troubles removing and reinstalling the headlights. Were you able to remove your windshield wiper tank? (this gives you more access to the left headlight) I removed the one bolt holding it on but I still couldn't move it. Felt like there was something else holding it down.
Quote:
|
Originally Posted by willrwilli
Mounting the rings was the hardest part for me. JLEVI suggested using either double sided tape or glue for this. They stated they usually use the tape, and since I had some 3M double sided tape that is what I went with. It was hard to position the small ring because there was not alot of space to mount it on. I cleared out my lenses, and I think that was the main issue. If I left in the front waffle grids this would not have been an issue.
|
I went with silicone II. Doubleside tape just seems too weak for me. I didn't want to take the chance of it falling off and needing to open up the housing a second time to fix it. Plus can't you see the doublesided tape? SiliconeII seem like a cleaner install. I found that removing the chrome rings to glue on the angel eyes is the easiest.
Quote:
|
Originally Posted by willrwilli
As for the pictures it keeps saying my file is too big, what should I do?
|
Try
www.photobucket.com. You can upload any pic and if its too big, they will resize it for you. Look forward to seeing pics!