Hey Monkey

How would one use this to reset the adaptive info? Do I need ot unplug something first?

See what I mean?

If the vehicle does not start, or runs in "fail-safe" mode after replacing the DME or EDK, perform
the following procedure:
1. Turn ignition ON (KL15) for 10 seconds. DO NOT ATTEMPT TO CRANK / START THE
ENGINE.
2. Turn the ignition OFF for 10 seconds.
3. Start the engine.

__________________
Tim in Denver

04 Porsche C4S

05 Volvo S60R manual

20's are just fine in the snow you Baby!