Quote:
Originally Posted by RRPhil
If your engine is the V8 your 5HP24 will have two screws attaching the filter to the valve block. Like the 22 screws that hold on the sump pan these require a TorxT27 driver. The filter screws are tightened to 5Nm and the sump pan screws to 10Nm.
Phil
|
good thing Phil shows up, I forgot about those two screws but even with them off I need to pull on the filter gently. The important thing is:
- correct fluid type and amount, 5.5 quart Esso LT71141 (for 5HP24 in 4.4i V8)
- O-ring
- torque specs for those screws and screws holding the pan.
Good luck.