Is your question: How did I take out the whole assembly? or What lights did I replace stock bulbs for which LED bulbs.
First all the interior lights are the same size from the overhead lights to the underdash and trunk lights. The official light bulb is a 2825 bulb. I used a 194 in all headliner lights.
Here are the actual bulbs I used in the headliner front and back.
This one is in the front headline center:
http://a763.g.akamai.net/7/763/1644/...p/VPID/5768086
The rest of the dome lights were replaced with these:
Do These give out an error code? Or anything else we should worry bout?
2 V-LEDS 6K WHITE 194 13 LED LIGHT BULBS 158 168 2825
These bulbs are bright and have a great surround light, but the bulb itself is too long. So I am going to move the those bulbs to the under dash lights to brighten it up. A good bulb for the map lights should be directional. Something like these:
V-LEDS HID WHITE 4 M-SMT 2W HIGH POWER BULBS 194 168 158
Hope I answered your question. Anymore questions I am here. The front assembly which holds the 2 maps lights and the center welcome light is really easy. The second row lights is a little more tricky as you need a small flat head screwdriver to start it. Then use a medium flat head to push in the metal piece and it "should" pop down.