Hi Guys

I recently retrofitted CIC to a 2008 e70 & same as you had only PDC audio, I fitted the later JBE & extended the cables from the old PDC unit to the JBE.

I then changed the build date of the car in NCS to 10/09 & recoded the JBE & RPDC, I now get the picture displaying correctly but no audio.

I have also recoded the CIC again & the IHKA for the PDC button to work correctly but cant get any beeps!
I can change the volume of the beeps in the CIC ok though.

Is there any specific coding that has to be done?

If I put the old PDC on & plug the sensors back into it the audio comes back

Any input greatly appreciated
Jase