Quote:
Originally Posted by Schrei-x5
How is it excellent? Not even 3/4" MDF... Its 1/2".... Used counterbored screws. Which you dont need. The real component holding a air tight enclosure is the glue. Nails or staples are a extra measure. Sealed enclosures dont usually use cup terminals either (air leaks) also its felt not carpet and it was glued on instead of a spray adhesive...
Oh and IT DOES NOT FRIGGIN FIT!!!! MOST IMPORTANTLY!
Anyone who bought one of these with issues contact me..... I got a plan
|
Dun dun dun....our hero to save the day, Mighty Mouse is on the way!!!!
1/2" because 3/4" would take away tons of airspace....this box is small enough internally as is. The stock enclosure that I modified is plastic that isn't even more than an 1/8th thick and it sounds awesome. I'm sure he's glued it in there somewhere, otherwise sealed the seams w/ silicone...I highly doubt he just screwed it together and used NOTHING as a seam sealer. The screws...who cares as long as it holds it together. I've used wood screws or even sheetrock screws in enclosures I've built in the past...they all still work. We're building subwoofer enclosure here, not building houses!
Fitment issues I have no comment on since I dont have one. Plenty of people had nothing but good things to say, lately the last few have had complaints. That either leaves a construction mistake or even something like the interior differences between 99-02 and 03-up E53 body style changes.
No one forced you to buy this, so as the saying goes...if you can do it better, then do it.
__________________
650hp 10 X5///M - Stage 2, Vibrant 1794's , gutted cats, custom intake, AC Forged 22's
325hp 98 BMW 740iL -
///M5 6spd,
www.bavengine.com w/ Performance Option, electric fan, CF intake tube w/ heatshield, Mag 14816 w/ notched bumper, Bilstein/H&R Stage II/Powerflex
600+hp 02 Harley F150 - MHP900 Stage 3 engine, KB2.3, 8# lower, 60# inj, Walbro FP's
135hp 01 TL1000R - M4 full exhaust, K&N, Yosh box, -1/+2 gears, 2CT's