Quote:
Originally Posted by m5james
Slow down and lets start over....
1)What engine do you have, and what year is your X? Do us all a favor and fill out your Signature so we can at least starting helping you appropriately and know what you're working with.
2)You say you replaced only one of the camshaft position sensors, and you used aftermarket ones. I can guarantee you that you're going to continue to have problems, so put the old one back in, reset the codes, and have them re-read and report what you get.
3)Start the truck, unplug your MAF and see if it runs better
After you've done this, let me know.
|
1)2001 X5 4.4i V8, Sorry about the signature I'll get on that...
2) Yes I replaced one and I'm going to order an OEM asap, I would have put the old one back in but i threw it out 2 months ago when I changed the sensor, I have a scanner so I read them myself...
3) I tried the unplugging the MAF already, after a few seconds the exhaust smelled like rotten eggs, so i plugged it right back in, surprisingly it didnt set off a CEL which did seem kind of weird...