Not a record
It is out, I know, I didn't set a record! But I took it slowly and spent a little time figuring out how to lower it without man-handling it.
I built a frame from 2x4 lumber. L=36 and W=24. The support is centered 11 1/4" from the front. This way I could keep the TC and the AT together and used the rear brace to support the box. Used a strap to keep it all together. By chance it balanced pretty well and was no problem using a single floor jack.
I left one bolt with an inch play and separated the box, then took the last bolt out and lowered it slowly.
|