Quote:
Originally Posted by admranger
It isn't on correctly. Should fit tighter. Remove the two screws on each wheel well, then remove the two long torx bolts that hold the bumper to the carrier. Have a helper assist in lining everything up while you slide the bumper in on the hangers. then reinstal the two torx (loosely) and the other screws (loosely). Step back and look at gaps left to right. If ok, tighten everything down. If not, adjust, relook, then tighten.
It's not hard to screw up mounting it if you aren't patient (don't ask...).
|
On edit: I always forget the center shroud below the bumper. There's at least one screw in there that I forget to take off. Mental block I guess...
Netbrowser07: Look at the trailer hitch install threads, some of those have pics and a better description than I posted above.
__________________
Kirk
Las Vegas
2016 X5 40e Mineral White/Black Dakota Leather, ZLL, ZCW, ZDA, ZDB, ZPP, multi contour seats, rear side window shades, HK stereo
2011 E90M3, 6-speed manual
|