First off, thanks for all the replies! I'm very thankful for those that are posting to help with this. I know there have been many tutorials on this process and I've read most of them. have gotten the outer covering off and removed all the torx screws on the front of the display. I'm attempting to remove the black plastic housing from the circuit board to access the ribbon cable.

I am following the instructions posted in this link PIXEL FIX DIY write up, about a 2 hour job and some patience (Long pic warning) and it's showing the housing being removed in pictures 7 and 8 prior to drilling the access point to remove the display.

I've removed all the torx screws I could find on the front and the bottom clips pop off, but the housing still seems attached. I really don't want to break anything, so I'm just wondering what I'm doing wrong.