Very easy to explain but a very tedious task: buy a wire harness set or in my case I bought 5 kinds of different colored speaker wires with almost the same gauge/ thickness of the ones used for the MID connector. The idea is to extend the length of the MID wire harness to reach the glove box - so you're basically gonna cut the connector wires and use the new ones you got. It is crucial and imperative that you cut the WIRES ONE BY ONE and also CONNECT THEM ONE BY ONE so that you don't accidentally short them. Remove the glove box and route the WIRES to come in from the back or fuse box at the top part of the glove box. Connect to MID. Open a bottle of beer. Cheers!