View Single Post
  #10  
Old 10-31-2011, 06:16 AM
killcrap's Avatar
killcrap killcrap is offline
Member
 
Join Date: Mar 2009
Location: america
Posts: 1,508
killcrap is on a distinguished road
Quote:
Originally Posted by TwinTurboGTR View Post
Very good Drew,
Do not start chasing the problem because it won't solve anything. There are a lot of people on here; and I have done it myself, told the forum here, left and said "Damn, now I'm chasing a damn problem by throwing parts at it!"

Anyways, as far as the rough idle, it sounds like it has to do with the X breathing or emmissions. I would check to see the throttle body and look at that butterfly plate. If it is covered in carbon, that plate may have a hard time properly opening and closing. Carbon may be covering the plate, blocking air flow when the motor is in idle. If it is covered, hit it with throttle cleaner. I've done it on my X 4 times and no problems. You might trigger a CEL but it goes away after a few hours of driving. And emission wise, check the ERG valve a check to see if the valve is sticking, de to carbon build up. Anyone want to concur?

At least these things don't cost any money, well besides the $6 on the cleaner, and $9 for a 6 pack of bud???

the throttle body has no effect on this vehicle when it comes to idling, it is solely used for start up, failsafe and to maintain a 50mbar vaccum for emissions.

Quote:
Originally Posted by DrewN209 View Post
Thanks... Yea my idle is barely over 500. When I turn the AC on its jumps to about 650 or so and gets a lot smoother. Can you manually raise the idle ? Possibly an Indy or dealer could just override and turn the idle up a little ?
the idle on the ME9 engine management can be increased by 50rpms, a service function is available to do so
Reply With Quote

Sponsored Links