Quote:
Originally Posted by Ghost-Flame
Army how far into the valve cove pipe did you feed the tube (I'm assuming you pushed in as far as you can)? Did you seal the tubing in the vacum hose or did you allow some air to enter around the tube?
|
Ghost,
I pushed it in about haft way down. With an adapter (Micro Cleaning kit) from Shop-Vac to connect the vacuum and the tubing, it was sealed enough to do the job I wanted. Make sure you bend the tip of the tubing a little and make as flexible as you can. You will have a little challenge getting the tip to turn 90 degree at the start of the CCV pipe.
Edit: you can remove the middle piece and use it as in the picture on my first post.