hi Phil,

Sorry about the endless questions but I got one more...I finally had the chance to take out the clutch packs. at first sight they seem fine but looking at your pictures the one were you are measuring it i can see definit gaps between the "pads" around the ring and i started to look at mine. I only took out the centre support assembly and the clutches in there. the top look ok but in the middle clucthe i cant even feel the differences on the surface i mean i dont feel the gaps and on one there was no gap which leads me to believe i need to put new clutch packs in there. my question was do you know the tickness of the pads?


nevermind on the clutch thickness since i found 3 of them had been worn down ti metal.

in a seperate note i found once tooth on the back end of the The intermediate & overdrive clutch assembly with a crack that held a c clip large one and its underpressure, basically take youur pictre of the The intermediate & overdrive clutch assembly and look under it those are the teeth i am talking about.

it seems that u can just position the clip opening at that spot so the broken area wouldnt have been supporting anything anyways if not are you willing ti sell me the one you have?