Quote:
Originally Posted by Shled
OK, I will go now ask if you did the maneuver of pressing down-up-up-down on the forward/reverse buttons on the steering wheel to put the StealthOne (S1) in Setup Mode (see page 7)after powering up the V1 and S1 and waiting about 10 seconds. If your S1 came from an identical vehicle (2006 e53) you may not need to do this, but if it was setup for another (say an e38) you do. This is where you first tell the S1 what car you have.
If I missed the post that you tried that already please forgive and ignore this reply.
PS If you found the correct iBus wire (on my car it are white, yellow and grey), it does not matter where you find one, so the mount you are trying to achieve should be routed to the nearest (most convenient for you) iBus wire. |
Yes tried to get it into setup mode by following the instructions from the StealthOne Manual....I was bummed.
But I am learning to live with the V1 attached to the visor
I might give it another try after the holidays.
Just wish there was a way to tell if the unit is dead or just installed improperly. My 3rd attempt I had a friend that does stereo installations on High End cars take a go at it. He followed the same instructions and it did not work for him either.
I will take pics once I go thru the process again.
p.s. I did manage to get a burned copy of my Nav CD working with all the little upgrades so I am confidant in my ability to follow detailed instructions
