|
What a pain in the ass. I finally got it in last night - I had to shave off most of the top plastic nub on the PDC sensor and some of the side to get it to slide in. I must have spent 2 hours widdling away at it with the utility knife. I should have just used the Dremel on it. I scuffed up the area around the bumper hole and where the underpart of the surround meet so the glue would adhere better. Just prior to final insertion I gooped it up with Marine Grade Silicone glue around the edges, pressed it in and wiped the excess glue from the seams. Then I just cleaned the service and held it up with some tape. I think it should be on there good once cured.
I love how things that I think are going to take 3 minutes on this car end up taking 3 hours :-/
|