While we are on the topic...

I was troubleshooting my left front. It's been dropping overnight.
I found it leaking at the fitting that goes directly into the bag.

So, I took it off to replace it. I also removed the line and the fitting at the valve under the passenger door. I figured why not while I'm at it.

Got the new line and fittings all in, started the engine and the bag filled right up. No problem. I hop into the drivers seat just in time to hear the dreaded chime and see SELFLEVEL AIRSUSP. INACT pop up on the display. Now my raise and lower switch won't do anything.
I tried disconnecting the neg. cable in the trunk, did nothing. Have started/shut down about a hundred times, nothing. The suspension is sitting nice and level, it is adjusting (moved the rod and watched it adjust) but the freakin' code won't clear and I can't raise or lower manually...

Any other thoughts on how to clear the code myself? I tried pulling the two fuses above the subwoofer labled for air suspension already.

__________________
2005 4.8is